Taiwan
 
  SATA RAID Adapters
  SAS RAID Adapters
  Mezzanine Board
  SAS Non-RAID Adapters
  External RAID Controllers
  JBOD/Expander Box
   
  JBOD
-- 12Gb/s SAS JBOD
  12Gb/s Compact Disk Box
   
  Expander Box
  12Gb/s Expander Box
  Desktop RAID Subsystem
  Internal RAID Rack
  Thunderbolt Solutions
  External PCIe RAID
 
     

Home

> Products > JBOD/Expander Box
      > 12Gb/s SAS JBOD > 12Gb/s Compact Disk Box
      > 12Gb/s Expander Box


Relatived Resource  
 
ARC-4038 Manual
ARC-4038 SPEC
 

 


Relatived Product  
 
ARC-1883x
 

 

   
 

ARC-4038 (8-Bays 12Gb/s SAS Tower JBOD Enclosure)

 
 
The ARC-4038 SAS-to-SAS JBOD box provides a compact external storage chassis capable of accommodating up to 8 12Gb/s, Serial-Attached SCSI (SAS) drives or 6Gb/s Serial ATA (SATA) drives. The box can support both 3.5-inch disk drives and 2.5-inch disk drives, each one contained in its individual hole on the disk carrier. The expander module on ARC-4038 is designed with an integrated ARM Cortex-R4 processor for topology management functions such as discovery, enclosure and drive management, and LED management. Each ARC-4038 compact tower JBOD supports four 12Gb/s SFF-8644 and one 6Gb/s SFF-8088 SAS host and expansion connections. Out-of-band CLI can re-define manufacture default setting on those connections. Configuration and environmental information is accessible either via in-band (SES-3.0 over SMP) or out-of-band serial port.

ARC-4038 (Front)
ARC-4038 (Rear)
   
  Highlight
 
Four 12Gb/s SFF-8644 and one 6Gb/s SFF-8088 SAS
host and expansion connections
Compatible with 12Gb/s SAS host bus adapter and
12Gb/s SAS RAID controllers such as ARC-1883X
LED activity/status in each drive carrier
Daisy chain capacity expansion for additional
ARC-4038
Plug & Play add capacity without shutting down
SED (self-encrypting drives) function support
Support CLI for configuration and environmental
information
   
  Features
 
Drives
SAS hard drives
Up to 8 2.5-inch or 3.5-inch SAS hot-plug hard drives
(12.0 Gb/s) at speeds of 7.2K, 10K or 15K rpm
SATA hard drives
Up to 8 2.5-inch or 3.5-inch SATA hot-plug hard drives
(6.0 Gb/s) at speeds of 7.2K or 10K rpm
   
 
JBOD Controller Modules
Expander board 1 module
Sensors 1 sensor on the expander board
 
     
 
Backplane Board
Connectors
8 x SAS hard-drive connectors
1 x Power supply connector
2 x Cooling fan module connectors
1 x Sets of expander board connector
   
 
LED Indicators
Hard-drive carrier
1 x Blue single-color activity LED
1 x Two-color LED status indicator per drive
   
Expander board
2 x One-color LED status indicators for each SAS host port, one for SAS host port link and one for the activity status
2 x One-color LED status indicators for each SAS expansion port, one for SAS expansion port link and one for the activity state
   
 
Controller Back-Panel Connectors
I/O connectors
4 x SFF-8644 + 1 x SFF-8088 connectors for connection to the host/expansion
   
Management connector
1 x 6-pin UART RJ-11 connector
1 x RJ-45 LAN connector (manufacture manager only)
     
 
Power Supply
Wattage 220 W maximum continuous;
Voltage 90–256 V rated
Frequency 50–60 Hz
Amperage +12V/16A, +5V/16A, +3.3V/14A
     
 
Cooling Fan
Speed 2 X 2700rpm/brushless fan
Amperage 2 X 0.135A
     
 
Physical
Dimension
Height 302 mm
Width 146 mm
Depth 290 mm
Weight 14.9lbs/6.8 kg (without disk)
     
 
Environmental
Temperature
Operating 0° to 40°C
Storage –40° to 60°C
 
Relative humidity
Operating 10% to 80% (non-condensing)
Storage 5% to 95% (non-condensing)
     
   
Legal InformationPrivacy PolicySitemap Contact Us │ Copyright © 2005 Areca Technology Corp. All rights reserved.