

VMware ESXi 5.5.0 driver Installation Instructions

VMware uses a file package called a VIB (VMware Installation Bundle) as the 
mechanism for installing or updating software packages on an ESXi server.

The file may be installed directly on an ESXi server from the command line, or
through the VMware Update Manager (VUM).  


scsi-arcmsr-1.40.00.09-1OEM.550.0.0.1331820.x86_64.vib     --- VIBFILE
arcmsr-1.40.00.09-offline_bundle-10120452.zip              --- OFFLINE_BUNDLE


Fresh system installation
=========================

	For first time ESXi system installation, we encourage installation from VMware-xxx-RollupISO.iso other than
	from VMware-VMvisor-installer-xxx.iso. For example, ESXi driver rollup iso, VMware-ESXi-5.5U2-RollupISO2.iso and
	VMware-ESXi-5.5U3-RollupISO1.iso have include areca Raid adapter driver in iso file.
	But VMware-VMvisor-Installer-5.5.0.update02-2068190.x86_64.iso and 
	VMware-VMvisor-Installer-5.5.0.update03-3116895.x86_64.iso are not.


Install areca Raid driver on existed system
===========================================
	first time installation
	-----------------------

	To install Raid driver, you should perform the following steps:


	1. Copy the VIB or offline bundle to the ESXi server.  Technically, you can
           place the file anywhere that is accessible to the ESXi console shell, 
           but for these instructions, we'll assume the location is in '/tmp'.

           Here's an example of using the Linux 'scp' utility to copy the file
           from a local system to an ESXi server located at 10.10.10.10:

             scp scsi-arcmsr-1.40.00.09-1OEM.550.0.0.1331820.x86_64.vib root@10.10.10.10:/tmp

	2. Issue the following command (full path to the file must be specified):

              esxcli software vib install -v /tmp/{VIBFILE}
           or
              esxcli software vib install -d /tmp/{OFFLINE_BUNDLE}
       
           In the example above, this would be:

              esxcli software vib install -v /tmp/scsi-arcmsr-1.40.00.09-1OEM.550.0.0.1331820.x86_64.vib

	Note:   Depending on the certificate used to sign the VIB, you may need to
		change the host acceptance level.  To do this, use the following command:
		esxcli software acceptance set --level=<level>
		Also, depending on the type of VIB being installed, you may have to put
		ESXi into maintenance mode.  This can be done through the VI Client, or by
		adding the '--maintenance-mode' option to the above esxcli command.


	Update Installation
	--------------------
	The update process is similar to first time installation, except the command that should
	be issued as following:

		esxcli software vib update -v {VIBFILE}
	or
		esxcli software vib update -d {OFFLINE_BUNDLE}


VUM INSTALLATION
----------------

The VMware Update Manager (VUM) is a plugin for the Virtual Center Server
(vCenter Server).  You can use the VUM UI to install a VIB by importing
the associated offline bundle package (a ZIP file that contains the VIB and 
metadata).  You can then create an add-on baseline and remediate the
host(s) with this baseline.  Please see the vCenter Server documentation for
more details on VUM.


Download driver URL
-------------------

The latest driver offline-bundle or vib can be downloaded from Areca website.
http://www.areca.com.tw/support/s_vmware/vmware.htm


VAAI API
--------

At this moment, Areca driver and Raid controller are not support vmware VAAI API.
To disabling the VAAI functionality in ESXi/ESX, refer to following URL or search vmware knowledge base 1033665.
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1033665
