| |
|
| |
ARC-5060 (Hi-Speed eSATA/USB 2.0/iSCSI/AoE)
|
| |
|
| |
The ARC-5060 RAID controller offers a truly innovative eSATA(3.0Gbps)/USB2.0/ iSCSI/AoE solution for use with your PC and Mac workstation. With RAID box technology, it allows two HDDs failure without impact on the existing data and failed drive rebuild is transparent to the host.
|
 |
| Designed and leveraged with Areca high volume RAID controllers experience, this RAID box brings a level of data reliability and availability to cost- sensitive storage platforms that were typically available only with high-end enterprise-class storage systems. The introduction of the industry's first 16 channels eSATA solution provides a major benefit for thoses applications requiring cost-effective RAID solutions that take advantage of low cost, high capacity SATA disk drives. ARC-5020-3 re-driver board guarantees the signal from internal SATA connector to the eSATA connector which can meet eSATA the electrical compliance requirements. |
|
| |
|
| |
RAID Features |
| |
 |
400MHz storage I/O processor |
| |
|
Unleash the power of 3.0Gbps and NCQ on the eSATA host port |
| |
|
NVRAM for RAID events log & transaction log |
| |
|
Write-through or write-back cache support |
| |
|
Redundant flash image for controller availability |
| |
|
RAID level 0, 1, 10, 1E, 3, 5, 6, Single Disk or JBOD |
| |
|
Multiple RAID selection |
| |
|
Up to 16 volumes per RAID controller (port multiplier SATA
host: 8 volumes, without port multiplier SATA host: 1 volume
, iSCSI/AoE: 8 volumes and USB 2.0: 8 volumes) |
| |
|
Online array roaming |
| |
|
Online RAID level/stripe size migration |
| |
|
Online capacity expansion and RAID level migration
simultaneously |
| |
|
Online dynamic volume set capacity expansion |
| |
|
Offline RAID set and greater 2TB per volume |
| |
|
Instant availability and background initialization |
| |
|
Automatic insertion/removal detection and rebuild |
| |
|
Support SMART, NCQ, and OOB staggered spin-up capable
drives |
| |
|
| |
Host Interface |
| |
|
2 x 3Gbps eSATA, iSCSI/AoE and USB 2.0 |
| |
|
| |
Disk Interface |
| |
|
12/16 x 3.0Gbps SATA ll, hot swappable drives |
| |
|
| |
Monitors/Indicators |
| |
|
Push Buttons and LCD Display Panel for setup and status |
| |
|
Environment and drive failure indication through LCD, LED and alarm buzzer |
| |
|
Individual fault header, SGPIO and serial bus interface |
| |
|
Support 4 x 3-pin fan connector |
| |
|
Support 1 x 2-pin power status connector |
| |
|
| |
RAID Management |
| |
|
Field-upgradeable firmware in flash ROM via RS-232 and LAN port |
| |
|
LCD Hot-Key supports one-step easy RAID configuration |
| |
|
Firmware-embedded manager via RS-232 port |
| |
|
Firmware-embedded Browser-based RAID manager, SMTP manager, SNMP agent and Telnet function via LAN port |
| |
|
Support RAID box’s API library for customer to write its own AP |
| |
Accessory |
| |
|
ARC-5020-3 (Internal SATA to eSATA redriver board) |
| |
|
ARC-1300-4e (4 port eSATA host adapter) |
| |
|
|
