| |
│Cable Solution │ Backplane Solution (Intel IOP) │ |
| |
│ Backplane Solution (Power PC) │ |
| |
|
| |
ARC-6080
(8/12/16-port 4Gbps Fibre-to-SATA ll Controller)
|
| |
The ARC-6080 external RAID controller features a two 4Gbps Fibre host and SATA ll device attachment. The controller has a base module with 16x SATA ll channels for disk drives.Installing a two 4Gbps Fibre channels host daughter board onto the base module allow you to support 16 channels Fibre-to-SATA ll function.
|
|
|
| |
|
| |
System Architecture |
| |
|
PowerPC 533MHz 440SP 64-bit storage processor |
| |
|
Up to 4GB DDR-ll 667 SDRAM on one DIMM socket with ECC protection |
| |
|
Agilent dual channel 4Gb Fibre channel controller |
| |
|
Marvell 8 channels PCI-X SATA ll controller |
| |
|
Areca ASIC to support extreme performance RAID 6 function |
| |
|
NVRAM for RAID configuration & transaction log |
| |
|
Write-through or write-back cache support |
| |
|
Redundant flash image for adapter availability |
| |
|
Real Time clock support |
| |
|
Battery Backup Module (BBM) ready
ARC-6120BA-T2xx, xx means version no. |
| |
|
| |
RAID Features |
| |
|
RAID level 0, 1, 1E, 3, 5, 6 and JBOD |
| |
|
Multiple RAID selection |
| |
|
Array roaming |
| |
|
Online RAID level/stripe size migration |
| |
|
Online RAID capacity expansion and RAID level migration simultaneously |
| |
|
Online Volume set growth |
| |
|
Instant availability and background initialization |
| |
|
Automatic insertion/removal detection and rebuild |
| |
|
Greater than 2TB per volume set (64-bit LBA suppot) |
| |
|
Support 4K bytes/sector for Windows up to 16TB per volume set |
| |
|
Support S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives |
| |
|
Disk Scrubbing/Array verify scheduling for automatic repair of all configured raid sets |
| |
|
Login record in the event log with IP address and service (http, telent, and serial) |
| |
|
Support NTP protocol to synchronize RAID clocks over the network |
| |
|
Automatic spin down drives when not in use to extend service life |
| |
|
| |
Drive Interface |
| |
|
8/12/16 SATA ll Channel-3.0Gpbs |
| |
|
| |
Host Interface |
| |
4Gb Fibre-to-SATA ll |
| |
|
Two 4Gb Fibre Channels-400MB/sec per channel |
| |
|
| |
Monitors/Indicators |
| |
|
LCD Control Panel for setup, alarm mute and configuration |
| |
|
System status indication through HDD activity/fault connector LCD connector and alarm buzzer |
| |
|
| |
RAID Management |
| |
|
Field-upgradeable firmware in flash ROM |
| |
|
Browser-based RAID manager via ArcHttp Proxy Server through RS232 for Windows & Linux system |
| |
|
Firmware-embedded manager via RS-232 port |
| |
|
Support controller's API library for customer to write its own software |
| |
|
Single Admin Portal (SAP) monitor utility |
| |
|
Disk Stress Test (DST) utility for production in Windows |
| |
|
Firmware-embedded Telnet function via Ethernet port |
| |
|
Firmware-embedded Browser-based RAID manager, SMTP manager, SNMP agent, and Telnet function via Ethernet port with no software required |
| |
|
| |
Software Drivers |
| |
|
OS Independent |
| |
|
|
